|  | What is so special about Vistamaxx specialty elastomers?
Vistamaxx specialty elastomers have a unique molecular structure, which is the result of our specially controlled metallocene solution polymerization process.
This structure enables the formation of a special semicrystalline polyolefin morphology, which provides:
- True elasticity in a polyolefin
- Softness
- Toughness in a polyolefin
- Transparency and colorability
- Excellent adhesion to PP and mPE
Vistamaxx specialty elastomers:
- Provide properties tunable in the continuum from elastomers to plastics
- Can be used alone or as a formulation modifier
- Are potential substitutes where SEBS and TPUs are over-specified
| Grade | MFR¹ (230°C) | Wt. %C | Density² | Relative Elasticity | Application | Datasheet | | Vistamaxx specialty elastomers | | 1100 | 4 | 15 | 0.862 | Very High | Film and Compounding |  | | 1120 | 22 | 14 | 0.862 | High | Film and Compounding | | | 2120 | 78 | 13 | 0.866 | Medium-High | Nonwovens & Fibers | | | 2125 | 79 | 13 | 0.868 | High | Nonwovens & Fibers | | | 2320 | 200 | 14 | 0.864 | High | Meltblown Nonwovens | | | 2330 | 285 | 13 | 0.868 | Medium-High | Meltblown Nonwovens | | | 3000 | 7 | 11 | 0.871 | Low | Film and Compounding | | | 6102 | 3 | 16 | 0.862 | Very High | Film and Compounding | | | 6202 | 18 | 15 | 0.861 | High | Film and Compounding | | | All values are typical and should not be interpreted as specifications. | | ¹MFR: g/10 min, test based on ASTM D-1238 (230°C, 2.16 kg) | | ²Density: g/cm³, ExxonMobil test method measured on compression molded specimens |
|
|
|
